Technical Data IconTechnical Data Icon

MPI-15

Magnetic length and angle measuring system

SKU: 9257 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Elesa -Clayton Weight of display
Code Description g
CE.99901-# MPI-15-# 180
# Complete by specifying the sensor cable length in decimetres (10=1 meter). Minimum length 0.2 m, maximum length 2.0 m. Example: CE.99901-06 MPI-15-06 display with sensor cable length 0.6 m.
Elesa-Clayton Band width Band nominal thickness
Code Description [mm] [mm]
CE.99903-# M-BAND-10-# 10 1.66
# Complete by specifying the length in decimetres (10=1 meter). Minimum length 0.5 m, maximum length 25 m.Example: CE.99903-15 M-BAND-10-15 magnetic band length 1.5 m.

Additional information

Accessories on request

<STRONG>M-BAND-10</STRONG>: the magnetic band M-BAND-10 is made of two separate parts: the magnetic band and the cover strip. The magnetic band is made of a magnetic tape, a carrier strip and an adhesive tape (Fig.2). The cover strip is made of a protection strip and an adhesive tape (Fig.1).<BR><STRONG>M-BAND-10 assembly instructions</STRONG><BR>The cover strip must be installed over the magnetic band to protect it from possible mechanical damages. <BR>1) Clean the mounting surface carefully.<BR>2) Remove the protective foil from the adhesive tape of the magnetic band.<BR>3) Stick the magnetic band on the mounting surface. <BR>4) Clean the surface of magnetic band carefully. <BR>5) Remove the protective foil from the adhesive tape of the cover strip.<BR>6) Stick the cover strip on the magnetic band. <BR>7) In the absence of a seat for the housing of M-BAND-10, secure the ends of the cover strip to prevent unintentional peeling.<BR>

Features and applications

The MPI-15 measuring system, made of a LCD multifunction display with integrated position magnetic sensor, combined with the magnetic band M-BAND-10 (to be ordered separately), is a complete system for the measurement of linear and angular displacement. Characterised by an extremely easy assembly, it allows precise alignment and positioning, reducing time and machining procedures to the minimum. <BR>- Multifunction LCD with 5 function keys. <BR>- Absolute/ incremental mode. <BR>- Programmable offset function. <BR>- External battery power supply 1.5 VDC. <BR>- Buffered memory during battery substitution. <BR>- Accidental polarity inversion protection.<BR>- Magnetic sensor envelope material: anodized aluminium. <BR>For further information read the operating instructions. <BR><STRONG>Special executions on request</STRONG><BR>The special plate display may be supplied with customised graphic symbols, marks or writings. <BR>Magnetic sensor with cable lenght different from the standard executions shown in the table, up to 20 m maximum. <BR><STRONG>MPI-15 assembly instructions</STRONG><BR>1) Make a drilling of 42 +0.2/+0.5 mm x 90 +0.2/+0.5 mm in the metal sheet for the installation of the display. <BR>2) Fix the display to the panel by using the specific mounting bracket (the screw is included in the supply). <BR>3) Make a drilling of diameter 34 +0.2/+0.5 mm in the metal sheet for the installation of the battery case. <BR>4) Fix the battery case to the panel by using the specific nut. <BR>5) Fix the magnetic sensor by using M3 screws (not included in the supply). Distance between sensor and magnetic tape to ensure a correct reading of the displacement: max 2.5 mm. <BR>

Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing