Technical Data IconTechnical Data Icon

NDE.T

End-caps expander for round tubes

SKU: 9424 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Standard Elements Main dimensions Tube dimensions Max limit static load* Weight
Code Description D h h1 d External Thickness Internal [N] g
430851 NDE.T-20×1.5-M8 20 37 5 M8 20 1.5 17 3000 14
430861 NDE.T-25×1-M10 25 37 5 M10 25 1 23 3000 30
430863 NDE.T-25×1.5-M8 25 37 5 M8 25 1.5 22 3000 19
430865 NDE.T-25×1.5-M10 25 37 5 M10 25 1.5 22 3000 29
430871 NDE.T-28×1.5-M8 28 37 5 M8 28 1.5 25 3000 26
430873 NDE.T-28×1.5-M10 28 42 5 M10 28 1.5 25 3000 33
430875 NDE.T-28×2-M10 28 37 5 M10 28 2 24 3000 31
430881 NDE.T-30×1.5-M10 30 36.5 5 M10 30 1.5 27 3000 36
430883 NDE.T-30×2-M8 30 36 5 M8 30 2 26 3000 26
430885 NDE.T-30×2-M10 30 36 5 M10 30 2 26 3000 34
430891 NDE.T-32×1.5-M8 32 37 5 M8 32 1.5 29 3000 31
430893 NDE.T-32×1.5-M10 32 37 5 M10 32 1.5 29 3000 39
430901 NDE.T-35×1.5-M10 35 36 5 M10 35 1.5 32 3000 43
430903 NDE.T-35×2-M10 35 37 5 M10 35 2 31 3000 42
430905 NDE.T-35×2.5-M10 35 37 5 M10 35 2.5 30 3000 41
430911 NDE.T-40×2-M8 40 36 5 M8 40 2 36 3000 41
430913 NDE.T-40×2-M10 40 37 5 M10 40 2 36 3000 50
430921 NDE.T-50×1.5-M10 50 37 5 M10 50 1.5 47 3000 71
430923 NDE.T-50×1.5-M12 50 37 5 M12 50 1.5 47 3000 71
430925 NDE.T-50×2-M10 50 37 5 M10 50 2 46 3000 64
* The max limit static load is the value above which the load applied to the element may cause some plastic material breakage, under particular conditions of use. Obviously, a factor that takes into consideration the importance and the safety level of the specific application must be applied to this value. The values shown in the table refer to the use of the end-cap in combination with a steel tube. The use of an aluminum tube may cause a decrease in the max limit static load equal to 25% due to possible deformations of the tube section under load.

Additional information

Colour

Black, matte finish.

Features and applications

The two end-cap parts are connected together by means of three pins which are housed in special counter-seats. Two cavities inside the endcap<BR>are provided for housing two hexagonal nuts DIN 934. Thanks to the tapered shape of the cavity, the end-cap exerts a pressure on the inner walls of the tube, due to the tightening of the nuts, thus ensuring<BR>the tensile strength of the connection. The level of the tensile strength depends on the tube dimensional tolerances, the roughness of the tube inner surfaces and the tightening torque applied.<BR>The end-cap enables the joining of round tubes with other elements or the installation of wheels or levelling elements with locking nut. The installation of a simple levelling element does not enable the expansion of the endcap: for this kind of applications the use of NDL.T end-caps is a more proper alternative.<BR>The assembly can be performed simply by positioning the end-cap inside the tube, with no need of screws or other fasteners.

Material

Polyamide (PA) based technopolymer. Resistant to solvents, oils, greases<BR>and other chemical agents.

Special executions on request

End-cap without nuts or assembled with only one nut DIN 934.