Technical Data IconTechnical Data Icon

NDL.T

End-caps for round tubes

SKU: 9423 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Standard Elements Main dimensions Tube dimensions Max limit static load* Weight
Code Description D h h1 d External Thickness min-max Internal max-min [N] g
430651 NDL.T-20×1-1.5-M8 20 34 5 M8 20 1-1.5 18-17 3000 10
430653 NDL.T-20×2-M8 20 34 5 M8 20 2 16 3000 9
430661 NDL.T-25×1.5-2-M6 25 34 5 M6 25 1.5-2 22-21 3000 12
430663 NDL.T-25×1.5-2-M8 25 34 5 M8 25 1.5-2 22-21 3000 14
430665 NDL.T-25×1.5-2-M10 25 33 5 M10 25 1.5-2 22-21 3000 18
430667 NDL.T-25×2.5-M8 25 34 5 M8 25 2.5 20 3000 12
430671 NDL.T-28×1.5-2-M10 28 34 5 M6 28 1.5-2 25-24 3000 16
430673 NDL.T-28×1-1.5-M8 28 34 5 M8 28 1-1.5 26-25 3000 17
430675 NDL.T-28×1-1.5-M10 28 34 5 M10 28 1-1.5 26-25 3000 21
430677 NDL.T-28×2-M8 28 34 5 M8 28 2 24 3000 16
430679 NDL.T-28×2-M10 28 34 5 M10 28 2 24 3000 20
430681 NDL.T-30×1-M8 30 34 5 M8 30 1 28 3000 19
430683 NDL.T-30×1-M10 30 34 5 M10 30 1 28 3000 22
430685 NDL.T-30×1.5-2-M8 30 34 5 M8 30 1.5-2 27-26 3000 18
430687 NDL.T-30×1.5-2-M10 30 34 5 M10 30 1.5-2 27-26 3000 22
430691 NDL.T-32×1.5-2-M8 32 34 5 M8 32 1.5-2 29-28 3000 22
430693 NDL.T-32×1.5-2-M10 32 34 5 M10 32 1.5-2 29-28 3000 26
430701 NDL.T-35×1-M10 35 34 5 M10 35 1 33 3000 29
430703 NDL.T-35×1.5-2-M8 35 34 5 M8 35 1.5-2 32-31 3000 25
430705 NDL.T-35×1.5-2-M10 35 34 5 M10 35 1.5-2 32-31 3000 29
430707 NDL.T-35×2.5-M8 35 34 5 M8 35 2.5 30 3000 23
430709 NDL.T-35×2.5-M10 35 34 5 M10 35 2.5 30 3000 27
430711 NDL.T-40×1.5-2-M8 40 34 5 M8 40 1.5-2 37-36 3000 33
430713 NDL.T-40×1.5-2-M10 40 34 5 M10 40 1.5-2 37-36 3000 37
430715 NDL.T-40×1.5-2-M12 40 34 5 M12 40 1.5-2 37-36 3000 40
430721 NDL.T-50×1.5-M8 50 34 5 M8 50 1.5 47 3000 45
430723 NDL.T-50×1.5-M10 50 34 5 M10 50 1.5 47 3000 48
430725 NDL.T-50×2-M8 50 34 5 M8 50 2 46 3000 43
430727 NDL.T-50×2-M10 50 34 5 M10 50 2 46 3000 46
430729 NDL.T-50×2.5-M12 50 34 5 M12 50 2.5 45 3000 49
* The max limit static load is the value above which the load applied to the element may cause some plastic material breakage, under particular conditions of use. Obviously, a factor that takes into consideration the importance and the safety level of the specific application must be applied to this value. The values shown in the table refer to the use of the end-cap in combination with a steel tube. The use of an aluminum tube may cause a decrease in the max limit static load equal to 25% due to possible deformations of the tube section under load.

Additional information

Colour

Black, matte finish.

Features and applications

The two end-cap parts are connected together by means of two pins which are housed in special counter-seats. A cavity inside the end-cap is provided for housing an hexagonal nut DIN 934.<BR>The assembly can be performed simply by positioning the end-cap, forcing it, inside the tube, with no need of screws or other fasteners.

Material

Polyamide (PA) based technopolymer. Resistant to solvents, oils, greases and other chemical agents.

Special executions on request

End-cap without nut.