Technical Data IconTechnical Data IconTechnical Data IconTechnical Data Icon

ESC

Door lock handles with/without built-in lock

SKU: 9403 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Ergostyle Weight
Code Description g
225021 ESC.90-BM-SS 83
225022 ESC.90-FM-SS 83
225023 ESC.90-BM-K-90-F 115
225024 ESC.90-FM-K-90-F 115
225025 ESC.90-BM-K-180-F 115
225026 ESC.90-FM-K-180-F 115
225029 ESC.90-BM-K-90-U 115
225030 ESC.90-FM-K-90-U 115
225031 ESC.90-BM-K-180-U 115
225032 ESC.90-FM-K-180-U 115

Additional information

Assembly instructions

To ensure a correct opening release strength (45 N as long as the handle is assembled in best conditions), we recommend to position the two elements of the handle as close as possible (Fig. 1) during assembly.<BR>Rear mounting by means of M6 hexagonal-head screws DIN 933 or M6 hexagonal nuts DIN 439B: place the screw as shown in Fig. 2. For ease of assembly with the nut, we recommend initially to fasten the nut as shown in the drawing.<BR>Front mounting by means of M6 cylindrical-head screws: place the doorframe and the door by applying the relevant caps that prevent access to the screws (Fig. 3) (tamperproof).<BR>Suggested tightening torque: 5 Nm.<BR>Only when the door is open, it is possible to remove the caps with a screwdriver on both the door (Fig. 4) and the doorframe (Fig. 5).

Closing lever

Zinc-plated steel, thickness 2 mm.

Features and applications

– ESC door lock handle (ELESA patent) keeps the door locked in the closed position. Because of its location outside the door, its installation is very simple.<BR>- The handle dimensions are such as to allow the assembly on profiles with a minimum size of 25 mm and a maximum of 40 mm.<BR>- The handle is able to compensate for any misalignment of the door bringing it back to the correct position while closing by means of the built-in guides.<BR>- The handle is tamperproof from the outside thanks to the rear fastening (ESC.90-BM) or front fastening (ESC.90-FM) with caps not removable when the handle is closed and preventing access to the screws.<BR>- Under specific tests the handle has always maintained unchanged performance for over 40000 cycles.

Handle

Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.<BR>Acetal resin based (POM) technopolymer retention wings.<BR>Resistant to solvents, oils, greases and other chemical agents.

Stator and rotor

Nickel-plated zinc alloy.

Two keys

Nickel-plated brass.

Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing