Technical Data IconTechnical Data IconTechnical Data Icon

CFMW.

Hinge

SKU: 9327 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Standards Elements Main dimensions Fitting Weight
Code Description L B f ±0.2 f1 ±0.2 H h1 h2 d d3 d4 C [Nm] # g
425951 CFMW.70-SH-6 70 60 50 42 25 15 15 13.5 6.5 12 5 80
425956 CFMW.110-SH-6 110 60 91 42 25 15 15 12 6.5 12 5 125
# Suggested tightening torque for assembly screws.
Resistance tests AXIAL STRESS RADIAL STRESS 90° ANGLED STRESS
Description Max limit static load Sa [N] Max limit static load Sr [N] Max limit static load S90 [N]
CFMW.70 4500 7600 5800
CFMW.110 2100 2800 1300
The max limit static load is the value above which the material may break thus prejudicing the hinge functionality. Obviously, a suitable factor, according to the importance and the safety level of the specific application, must be applied to this value.

Additional information

Assembly kit (see assembly)

– n°4 technopolymer covers (fig.1). <BR>- n°4 technopolymer bushings (fig.2 and fig.3).

Colour

Black, matte finish.

Features and applications

The different assembly options make this product easy to install on the most common aluminium profiles (30 mm minimum side). <BR>CFMW. hinge can be assembled with CFSW. hinge with built-in safety switch.

Material

Glass-fibre reinforced polyamide based (PA) SUPER-technopolymer. Resistant to solvents, oils, greases and other chemical agents.

Mounting

CFMW. hinge can be assembled in three different modes: <BR>- With M6 UNI 5933 ISO 10642 countersunk-head screw (not supplied) and screw cover supplied in the kit (fig. 1) to avoid free access to screws. <BR>- With cylindrical-head screw with hexagon socket M6 UNI 5931 ISO 4762 (not supplied) to set with the bushing supplied in the kit (fig.2). <BR>- With M6 UNI 5588 ISO 4032 nut (not supplied) and the bushing supplied in the kit (fig.3). This kind of assembly makes the hinge totally tamper-proof preventing any tampering.

Rotation angle (approximate value)

Max 180° (0° and +180° being 0° the condition where the interconnected surfaces are on the same plane). <BR>Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance. <BR>The condition where the two interconnected surfaces are on the same plane is to be strictly verified because the hinge must not be stressed by any negative angle (fig.4). <BR>To choose the convenient type and the right number of hinges for your application, see the Guidelines.

Rotation pin

Glass-fibre reinforced polyamide based (PA) technopolymer, black colour.

Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing