RE.FF

Injected polyurethane wheels

SKU: 9561 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Standard Elements Main dimensions Static load # Rolling resistance # Dynamic carrying capacity # Weight
Code Description D d l3 l4 [N] [N] [N] g
451001 RE.FF-080-RBL 80 12 30 39 2200 1200 1200 110
451006 RE.FF-100-RBL 100 12 30 44 3000 1700 1700 150
451011 RE.FF-125-RBL 125 15 35 44 3500 2300 2300 250
451016 RE.FF-150-RBL 150 20 45 59 5000 2800 3500 470
# See Technical Data for static load, rolling resistance and dynamic carrying capacity.

Additional information

Applications

Excellent rolling resistance and elasticity, good wear and tearing resistance.<BR>See Technical Data for Selection Parameters.

Covering

Injected polyurethane, hardness 55 Shore D.

Environmental conditions

Suitable for use in environments with the presence of atmospheric agents, alcohols and glycols; weak organic and mineral acids, water and saturated vapour.

Hub

Directly made into the centre.

Mechanical moving with towing devices

For mechanical towing, please see the technical specifications to determine the capacity variation.

Rolling resistance - force / load applied

The diagram shows the force to be applied to a wheel to keep it moving at the constant speed of 4 km/h, according to the applied load. <BR>The intersection point with a 50N value is the maximum transportable load with a manually actuated 4-wheel trolley; in fact, 200N = 50N x 4 wheels is the maximum force that may be supported by the operator according to the regulations in force regarding work safety.

Temperature

If operating temperatures in an application differ from the standard range of values, please see the technical specifications to determine the capacity variation.

Wheel centre body

Polyamide-based technopolymer (PA). Resistant to solvents, oils, greases and other chemical agents.

Notes

RE.FF wheels are also supplied with steel sheet brackets (RE.FF-N).

Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing