|Accessories on request||
FC-M12x1: extensions with 8 pole M12 female axial connector.
Pass-through holes for cylindrical head screws with hexagon socket.
Technopolymer, grey-black colour, matte finish. Supplied assembled, removable by a screwdriver.
Grey-black, matte finish.
|Features and applications||
These handles are typically assembled on machine doors or protections. With the correct electrical connection and the machine working, the red light is turned on and the green light is off. By pressing the button, the operator, via external contact, requests access to the protected area: in this case the green light will turn on, while the red one will be off. <BR>The EBR-SW handle is an ideal combination: ergonomic, functional and compact.
A red light and a green light indicate the microswitch status. Tension feed 24Vdc.
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
|Microswitch with button||
The device is made up of a normally open contact (NO) and a normally closed contact (NC).
– <STRONG>EBR-SW-B-C</STRONG>: zinc-plated connector with 8 poles, back axial output.<BR>- <STRONG>EBR-SW-B-F2.5</STRONG>: 8 pole cable, length 2.5 metres, back output.<BR>- <STRONG>EBR-SW-B-F5</STRONG>: 8 pole cable, length 5 metres, back output.<BR>- <STRONG>EBR-SW-D-C</STRONG>: zinc-plated steel connector with 8 poles, side axial output.<BR>- <STRONG>EBR-SW-D-F2.5</STRONG>: 8 pole cable, length 2.5 metres, side output.<BR>-<STRONG> EBR-SW-D-F5</STRONG>: 8 pole cable, length 5 metres, side output.
Tensile stress and impact strength: F1, F2, L1 and L2 values reported in the table are the result of breaking tests carried out with the appropriate dynamometric equipment under the test conditions shown in the figure with ambient temperature.