Technical Data IconTechnical Data IconTechnical Data Icon

EPR-SH

Flush pull handleassembly by means of screws

SKU: 7191 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Ergostyle Main dimensions F1 F2 Weight
Code Description B L H f h1 h2 b1 b2 l1 l2 [N] [N] g
261091-* EPR.110-SH-* 109 73 24 64 20 21.5 90 96 42 9 1300 500 39
261121-* EPR.120-SH-* 120 95 28.5 64 24 26.5 94 103 58 11 1200 400 55
Code Description
29851-* ECO.R1-*
29852-* ECO.R2-*
* Complete with colour index (C1,….,C6).

Additional information

Assembly instructions

1. Drill the handle housing according to the template dimensions reported in the table.<BR>2. Remove all drilling burrs before fitting the handle.<BR>3. Fit the upper part of the handle into the housing (Fig. 1) and press onto the lower part until firmly in place.<BR>4. Gently push the handle downward (Fig. 2).<BR>5. Fit the two self-tapping screws (Fig. 3).<BR>6. Assemble the screw cover by pressing on the lateral sides first and finally on the central part (Fig. 4).

Colour

Grey-black, matte finish.

Drilling template

On panels with thickness (s) exceeding 2.5 mm, we recommend you to fit the handle following one of the here-under reported ways:<BR>- by two self-tapping screws in the bores "d";<BR>- by two countersunk head screws M3x6 after tapping the bores in the panel;<BR>- by two countersunk head screws M3x10 with nuts, after drilling blind holes Ø 3.2 mm.

Ergonomy and design

A modern design thanks to the compact shape. The internal profile of the cavity offers a safe, comfortable and ergonomic grip. The coloured screw cover improves the visibility of the handle and offers the possibility of product customization.

Material

Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.

Screw cover

Technopolymer in Ergostyle colours, glossy finish, removable by a screwdriver by playing upon the central part (see drawing).<BR>Available also as accessory sold separately (see screw cover table).

Standard execution

Pass-through holes for AISI 304 stainless steel self-tapping screws according to ISO 7050 Ø 2.9×9.5 mm, supplied (see Assembly instructions).

Technical data

The lifting (F1) and pull out (F2) resistance values reported in the table are the result of tests carried out in laboratory with handles assembled on strengthened metal sheet panels with thickness = 1.5 mm (strengthened for test purposes).

Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing Additional Technical Drawing