Technical Data Icon

GN 440.6

Levelling elements with internal thread

SKU: 9284 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Standard Elements Main dimensions Bore Static load
in kN
Weight
Description d1 d3 l1 l2 l3 l4 r s1 s2 s3 A/F d2 t min. g #
GN 440.6-50-M8-* 50 13 25 6 6.5 45 15 2.5 2 4 14 M8 8 8 85
GN 440.6-50-M10-* 50 13 28 6 6.5 45 15 2.5 2 4 14 M10 10 14 90
GN 440.6-50-M12-* 50 13 32 6 6.5 45 15 2.5 2 4 17 M12 12 14 110
GN 440.6-50-M16-* 50 13 37 6 6.5 45 15 2.5 2 4 22 M16 16 14 120
GN 440.6-60-M8-* 60 13 25 6 7 50 15 2.5 2 4.5 14 M8 8 8 95
GN 440.6-60-M10-* 60 13 28 6 7 50 15 2.5 2 4.5 14 M10 10 14 110
GN 440.6-60-M12-* 60 13 32 6 7 50 15 2.5 2 4.5 17 M12 12 16 145
GN 440.6-60-M16-* 60 75 13 37 6 7 50 15 2.5 2 4.5 M16 22 16 160
GN 440.6-80-M8-* 80 13 26 7 8 70 15 3 2 5 14 M8 8 8 200
GN 440.6-80-M10-* 80 13 29 7 8 70 15 3 2 5 14 M10 10 14 220
GN 440.6-80-M12-* 80 13 32 7 8 70 15 3 2 5 17 M12 12 20 220
GN 440.6-80-M16-* 80 13 38 7 8 70 15 3 2 5 22 M16 16 20 230
GN 440.6-80-M20-* 80 13 45 7 8 70 15 3 2 5 27 M20 20 20 245
* Complete the description of the standard item needed by adding OS (without plastic cap), KR (with 73 plastic cap non-gliding) or GV (with rubber, vulcanised).# The values reported in the table refer to the heaviest type GV.

Additional information

Assembly screw

Stainless steel A2, glued.

Base

AISI 304 stainless steel.

Features and applications

The levelling elements GN 440.6 are an easy and very reasonably priced foot desgin variant. The static load capability of these levelling feet has been tested in a series of tests involving a tension-compression test bench. <BR>The values given in the table assume a straight compressive load perpendicular to the articulated foot. The bending and buckling stress factors often found in practice reduce the load rating of the screw and must be compensated accordingly.

Internal thread

AISI 303 stainless steel.

Standard versions available

– Type <STRONG>OS</STRONG>: without plastic cap. <BR>- Type <STRONG>KR</STRONG>: with 80 Shore A ≈ hardness thermoplastic rubber cap (SANTROPENE), non-gliding. <BR>- Type <STRONG>GV</STRONG>: NBR rubber (PERBUNAN), hardness from 65 to 75 Shore A ≈, vulcanised to the base. <BR>