Technical Data IconTechnical Data Icon

CFV.

Detent position hinges

SKU: 8871 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Standard Elements Main dimensions Fitting Weight
Code Description L B H f f1 h1 h2 b1 d d1 d2 d6 h3 C [Nm] # g
427626 CFV.65 SH-6 65 49.5 12 45 30 6 10 18.5 5 6.5 12.5 4 38
427621 CFV.65 EH-6 65 49.5 12 45 30 6 10 18.5 5 6.5 10 5 4 38
# Suggested tightening torque for assembly screws.
Resistance tests AXIAL STRESS RADIAL STRESS 70° and 115° ANGLED STRESS 90° ANGLED STRESS Resistant torque
Description Maximum working load Ea [N] Load at breakage Ra [N] Maximum working load Er [N] Load at breakage Rr [N] Maximum working load E70 and E115 [N] Load at breakage R70 and R115 [N] Maximum working load E90 [N] Load at breakage R90 [N] [Nm]
CFV.65 SH-6 1320 4480 2070 5060 2150 3170 1630 3380 3
CFV.65 EH-6 1520 3840 1940 4900 1430 3660 970 3140 3

Additional information

Colour

Black, matte finish.

Material

Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.

Resistant torque

All detent positions guarantee a resistant torque of about 3 Nm (which is the torque that must be applied to free the detent device of the hinge).<BR>The hinge had been tested with more than 20.000 opening and closing cycles and the value of the resistant torque was unchanged.

Rotation angle (approximate value)

Max 210° (-90° and +120° being 0° the condition where the interconnected surfaces are on the same plane).<BR>Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.<BR>The detent device (ELESA patent) allows four different detent positions of the door (-90°, 0°, +70°, +115°).

Rotation pin

AISI 303 stainless steel.

Standard executions

-<STRONG>CFV-SH</STRONG>: pass-through holes for countersunk head screws.<BR>-<STRONG>CFV-EH</STRONG>: pass-through holes for hexagonal head screws.

Notes

To choose the convenient type and the right number of hinges for your application, see the Guidelines.

Additional Technical Drawing Additional Technical Drawing