Technical Data IconTechnical Data IconTechnical Data Icon

HCX-BW-SST

Column level indicators for hot water

SKU: 7395 Category:
To request 2D/3D drawings, click on the RED code/desc in Product Details below.
Technical Drawing

Product Details

Standard Elements Main dimensions Weight
Code Description f d A B C L e m r g
11345 HCX.76-BW-SST-M10 76 M10 22 16 27 107 40 18 15.5 87
11355 HCX.127-BW-SST-M12 127 M12 23 18 31 161 80 23 17 138
11365 HCX.254-BW-SST-M12 254 M12 21 18 35 291 203 26 18.5 185
Drilling and installation data
Description d’-0.2 f’±0.2 Maximum tightening torque
[Nm]
HCX.76 10.5 76 8
HCX.127 12.5 127 8
HCX.254 12.5 254 8

Additional information

Assembly

– When nuts can be fitted from the inside of the reservoir, by means of the supplied set screws and nuts. <BR>- When nuts cannot be fitted from the inside of the reservoir and the walls are thick enough, by means of the supplied set screws, without nuts, by tapping the two holes in the reservoir walls. <BR>To ensure the best sealing of the O-rings it is recommended to apply the maximum torque on the nuts as reported in the table and a roughness of the gasket application surface Ra = 3 µm.

Contrast screen

White lacquered aluminium. The housing, in the appropriate external rear slot, guarantees the best protection from direct contact with fluid, avoiding yellowing effect due to the prolonged action of the fluid at high temperatures.<BR>It can be removed before installation to fit marks and words (for example MAX-MIN).

Features and performances

Assembled using ultrasound welding to guarantee a perfect seal. Entirely in transparent material: maximum fluid level visibility even from side positions. Visibility magnified by lens effect.

Material

Transparent polyamide based (PA-T) technopolymer. Highly resistant to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naphtha, phosphoric esters. Avoid contact with alcohol or detergents containing alcohol. <BR>The special technopolymer used for HCX.INOX-BW column level indicator allows to use it even in circuits working with very hot water and prevents milk effect on the transparent surface.

Maximum continuous working temperature

80°C with peaks of 90°C.

Packing rings

FKM (type VITON<SUP>®</SUP>, registered trade mark of DuPont Dow Elastomers) O-Ring.

Screws, nuts and washers

<P>AISI 303 stainless steel screws, AISI 304 stainless steel nuts and washers.</P>

Special executions on request

Indicators with two red ball-shaped floats.

Technical data

In laboratory tests carried out with mineral oil for hydraulic systems type CB68 (according to ISO 3498) with gradually increasing pressure, at 23°C, the weld stood up as follows:<BR>- HCX.76-INOX-BW 10 bar<BR>- HCX.127-INOX-BW 10 bar<BR>- HCX.254-INOX-BW 10 bar<BR>In any case we suggest to verifiy the suitability of the product under the actual working conditions. If you need to use the indicator with other fluids and under different pressure and temperatures conditions, please contact ELESA Technical Department or carry out tests in order to guarantee a proper use.

Additional Technical Drawing